Piccola pompa idraulica domestica a manovella, pompa idraulica elettrica a trapano, pompaggio dell'acqua, benzina, diesel, velocità elevata

Product Description [Features of the Drilling Pump] This water pump boasts advantages such as large flow rate, stable performance, high efficiency, and easy installation. [High Speed] This water pump delivers water very quickly, reaching 20-30 liters per minute (depending on drilling speed). [Ease of Use and Storage] After installing all accessories and drill bits, the pump can be used with an electric drill, making operation very simple. Recommendations: 1. Before use, add a small amount of lubricating oil to the pump inlet for optimal start-up and longer service life. Rinse with clean water after each use. 2. Ensure the inlet hose is well-sealed and as short as possible (approximately 1 meter). 3. Use the pump in temperatures ranging from 5°C to 49°C (41°F to 120°F). 4. When pumping abrasive liquids or liquids containing solid particles, using a filter in the inlet line can extend the pump's service life. 5. It is recommended to use a bracket to mount the pump on a sturdy surface to ensure safe operation. 6. Install and start the water pump. Check the inlet hose to ensure fluid is drawn into the pump within 15-20 seconds. If the above methods are ineffective, please check that the inlet pipe is correctly connected to the water pump. Never allow the water pump to run dry. If the pump fails to start, check that the hose is not twisted or blocked. The pump relies on the pumped fluid for lubrication. 7. Recommended speed is 1500-3500 rpm. Head and flow rate depend on the speed; higher speeds are better.